Terrain → STL Panorama Settings
My projects Sign out

Save to your account

Area

No area selected yet.

Viewing a shared project (read-only link).

Water

When checked, lake/river polygons are pulled from OpenStreetMap and every point inside a lake is set to one flat elevation, instead of following noisy raw terrain data.

Exaggerates flattened lakes 100m above their real elevation so their outline is unmistakable in the preview — use this to visually check the detected shape against the real lake before turning it off.

Model

3MF export needs a sliver of room beside the model for the multi-color prime/wipe tower (Bambu Studio always requires one when a print uses more than one filament, so it can't just be turned off - shrunk here to its documented 2mm minimum). At 250mm there's only ~6mm of slack left on a 256x256mm P2S bed, so Bambu Studio may still warn about a prime-tower collision.

3MF export needs room beside the model for both the AMS exclusion zone at the front-left of the plate and the multi-color prime/wipe tower (Bambu Studio always requires one when a print uses more than one filament, so it can't just be turned off). Tiles up to ~176mm leave enough margin for both on a 256x256mm bed (P1S/P2S/X1/X1C); above that, Bambu Studio may warn about exclusion-zone or prime-tower collisions since there's no clear space left to place them.

Color by elevation

up to m
up to m
up to m
above

Export format

3MF bakes your elevation color bands in as Bambu Studio height-range filament changes (one per band), so AMS multi-color printing works without manually setting up height ranges yourself. Requires "Color preview by elevation" above to be on. Load the matching filament color into each AMS slot 1-4 to get these colors physically.

Advanced

Elevation source

Mapbox token

USGS 3DEP covers the continental US and ships already hydro-flattened at the source — real lakes and rivers are already flat before the "Flatten lakes" step even runs. Outside the US, switch to AWS or Mapbox.

Log